Setting The Ballistic Curve - Leica RANGEMASTER 2700-B Manual De Instrucciones

Setting the ballistic curve

Start with step 1 if you have not previously opened the
menu control, or with step 3 if you have just set the
unit of measure and is still flashing in the display.
bAll
1. Press and hold the secondary button
• appears.
EU.US
2. Press the secondary button briefly (< 2 s) once.
• The display switches to the ballistic curves
bALL.
Press the main button 2.
3.
• The display switches to
– or
EU1
–
US1
Note:
When a memory card is inserted (see p. ??),
appears before
CArd
1
(≥ 3 s).
/ .
EU1 US1
4. By pressing the main button repeatedly, select the
desired ballistic curve, i.e.
– to or to US12, or
EU1 EU12 US1
– OFF, if you want to have a distance display
without point of impact settings display (AbC,
see p. 51 ff).
5. Save your setting by briefly pressing the second-
ary button.
• The saved setting is initially lit continuously for
4 s as confirmation, then the display changes
first to the zeroing distance setting (SId) and
then disappears.
If a ballistic curve is set, after each distance measure-
ment the range value is first displayed for 2 s, then the
calculated correction value for 6 s.
EN
49