English -- Legend
LABELS
a
S Model
S Serial No.
S Low/High side refrigeration
circuit design pressure
S Max air pressure
S Max air inlet
S Min. ambient
Max ambient
S Power supply
Electrical diagram no.
S Oil
S Refrigerant
S Weight
b. REMEMBER
TO CHANGE YOUR FILTER ELEMENT
element installed on:
We strongly recommend filter elements be changed once a year
or after 8000 working hours, whichever comes first.
Only use genuine Ingersoll Rand elements.
Refer to User Manual for correct replacement element.
c
QUALITY CHECKED INSPECTOR N. 302
d. Air inlet
e.
Air outlet
f.
Condensate drain connection
g.
WARNING:
Risk of electric shock can cause injury or death.
Disconnect all remote electric power supplies before servicing.
Internal Dryer
h. ATTENTION: SCHRADER VALVE
1 This unit is equipped with refrigerant as for quantity and kind clearly shown in operating
manual and with identification label.
2 Any ordinary test and / or refrigerant recharge by means of connections can take place
only after refrigerant evacuation. The evacuation must be proportional to dimensions and
length of the connections used. The use of the valve can be justified only when the dryer
is not in working order.
3 During the unit guarantee period, the Schrader valve can be used by authorized staff only,
otherwise any damage caused by a wrong refrigerant recharge will not be under warranty.
CPN: 85616902 --- DS15- - H---DS100- - H
DRAWINGS
1. MC
compressor
2.
refrigerant condenser
3. EV1
fan motor
4.
evaporator
5.
separator
7.
expansion automatic valve
8.
refrigerant filter
10.
air ---air heat exchanger
11.
dew point thermometer
12. TV
fan condensing temperature switch
13 HP
high pressure switch
14. QS---HL main switch with on lamp (green)
15. EV2
aftercooler fan motor
16.
aftercooler coil
17.
filter separator
18
drain valve
SK
overload protector
KA
starting relay
C1
compressor starting capacitor
C2
fan motor run capacitor
QF
residual current circuit---breaker (by installer)
A.
condensate drain (complete)
B.
O---ring
39