Maintenance; Fuse Replacement; Dismounting The Unit; Notes On Using The Optional Rotary Commander Rm-X2S - Sony CDX-5100 Manual De Instrucciones

Maintenance

Fuse Replacement

When replacing the fuse, be sure to use one
with the correct amperage stated on the fuse
case. Never use a fuse whose amperage rating
exceeds the one supplied with the unit as this
could cause a malfunction of the unit.
Warning
Use a fuse with the specified amperage.
Use of a fuse with higher amperage may cause
serious damage.
Cleaning the Connectors
The unit may not function properly if the
connectors between the unit and the front
panel are not clean. In order to prevent this,
open the front panel by pressing the RELEASE
button, then detach it and clean with a cotton
swab dipped in alcohol. Do not apply too
much force. Otherwise, the connector may get
EN damaged.
Back of the front panel

Dismounting the Unit

1
2
10
Actual total number:
Main unit
0 5
Release key
(supplied)
3
4
Notes on Using the
Optional Rotary
Commander RM-X2S
This unit can be used with the separately
available optional rotary commander
(RM-X2S).
Four button name labels are supplied with the
rotary commander. Attach that label which
matches the functions of the master unit and
the installing position of the rotary
commander.
In case you connect this unit, attach the label
which has "DSPL" on it.
DS PL
MO DE
SE L
Attach the appropriate label for the installing
position of the rotary commander.
E
Sony CDX-5100 ( ,S,C) 3-810-776-11(1)
SE L
MO DE
DS PL