Options - Maytag EPIC MHP1000SQ Manual De Uso Y Cuidado

Preset cycle settings
Each cycle has a preset Soil Level (cycle time), Water Temperature, and Spin Speed. The
preset settings provide the recommended fabric care for the selected cycle. See chart.
Cycles Soil Level
(cycle time)
Sanitary Normal
(1:55)
Whitest Whites Normal
(1:00)
Heavy Duty Normal
(1:15)
Normal/Casual Normal
(0:40)
Rapid Wash Less soil
(0:35)
Delicate Normal
(0:35)
Silk Normal
(0:26)
Wool Normal
(0:30)
Handwash Normal
(0:30)
Soak Normal
(0:30)
Rinse/Spin Normal
(0:21)
Drain/Spin Normal
(0:11)
† Spin speeds may vary on some models
To change the preset cycle settings
Press the selector of each setting until the desired setting glows.
Normal Washer Sounds
As with any new product, you will hear sounds that you are not accustomed to. You may hear
various sounds when the door is locked and unlocked, and during the washing, rinsing, and
spinning process. Between changes in wash actions, there will be momentary pauses. You
will hear water spraying and splashing during the wash and rinse cycles. These new sounds
and pauses are part of normal washer operation.
18
Water Temp Spin Speed
Super Hot/Cold Extra High †
Hot/Cold Extra High †
Hot/Cold Extra High †
Warm/Cold High
Warm/Cold Extra High †
Warm/Cold Medium
Cold/Cold No Spin
Cold/Cold Medium
Cold/Cold Extra Low
Warm/Cold No Spin
Cold/Cold Extra High
N/A Extra High
You can customize your wash by adding options to your cycle selections. You can add or
change an option after starting a cycle anytime before the selected option begins. Not all
options are available with all cycles.
See the "Laundry Guide" for an overview of possible options for each Wash Cycle
selection.
You can select more than one option for a cycle. Some options cannot be added to some
cycles; for example, Oxi Prewash cannot be added to the Rapid Wash cycle.
If an option is available with a selected cycle, the light for that option will glow when
selected.
If an option is unavailable with a selected cycle, there will be a short tone, and the light
for that option will not glow when selected.
Oxi Prewash
Use this option for heavily soiled loads that need pretreatment. This option adds a 15-minute
Oxi Prewash and drain to the main wash cycle.
NOTES:
Add Oxi or color safe products or / detergent to the Oxi Prewash and Main Wash
compartments of the Dispenser Drawer.
When using Oxi Prewash, use powdered detergent for the Main Wash detergent
compartment because liquid detergent will seep into the washer during Auto Soak.
NOTE: The Oxi Prewash and Auto Soak options cannot be selected in the same cycle.
Auto Soak
Use the Auto Soak option for loads of heavily soiled cotton, linen, polyester or nylon with
stains. During Auto Soak, water will be added to the drum and the laundry will be equally
distributed by a short tumbling phase. Laundry will then be soaked by phases without drum
movement. After soaking, the washer drains without spinning.
Add detergent to both the Oxi Prewash and Main Wash compartments of the Dispenser
Drawer.
Use powdered detergent for the main wash cycle because liquid detergent will seep into
the washer during Auto Soak.
For cycles with Hot Wash Temperatures, the Soak temperature is set to WARM. Otherwise
the Soak temperature is the same as the Wash Temperature.
The Auto Soak and Oxi Prewash options cannot be selected in the same cycle.

Options