Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Reset
Reset (menu reset) restores factory settings and returns the Gage
to a known condition. The following occurs:
- All batches and stored datasets, batch names and screen
captures are erased.
- Menu settings are returned to the following:
Memory = OFF
Statistics = OFF
Peak Density* = On
Memory Display = None
*
PosiTector RTR-P models only
Perform a more thorough Hard Reset as follows:
1
Power down the Gage and wait 5 seconds.
2
Simultaneously press and hold the (+) and
buttons until the Reset symbol
This returns the Gage to a known, "out-of-the-box" condition.
It performs the same function as a menu Reset with the addition of:
- Bluetooth Pairing info is cleared.
- Alarm settings are set to defaults.
- Menu settings are returned to the following:
Units = microns
Flip Display = Normal
Sound = ON
Language = English
NOTE:
Date, Time and WiFi are not affected by either Reset.
Peak Density
When selected, the Gage will measure and display areal peak
density (P
), the number of peaks per unit area.
d
Setup Menu
Bluetooth = OFF
WiFi = OFF
2D* = OFF
Battery Type = Alkaline
Backlight = Normal
USB Drive = ON
Auto Sync = OFF
(RTR-P only)
9
Tape Grade = XC
Linearize = ON
3D* = OFF
appears.
center
Tabla de contenido
