Menu Operation - DeFelsko PosiTector BHI Guía Rápida

Gage functions are menu controlled. To access the Menu, power-up
the gage, then press the center navigation button.
To navigate, use the Up and Down buttons to scroll vertically and
to SELECT.
Previous Page
(Exit)
Access the Menu
(Center/Select)
When powered-up, the PosiTector automatically determines which
probe is attached and does a self-check.
To disconnect a probe from a body, slide the plastic probe
connector horizontally (in the direction of the arrow) away
from the body. Reverse these steps to attach a different
probe. It is not necessary to power-down the Gage when
switching probes.
The PosiTector gage body accepts a wide variety of probe
types including magnetic, eddy-current and ultrasonic coating
thickness, surface profile, environmental, hardness, salt
contamination and ultrasonic wall thickness probes.
See www.defelsko.com/probes
The PosiTector BHI consists of the PosiTector
BHI probe, Standard or Advanced gage body,
leveling plate, test disks (2), replacement indentor,
replacement indentor tool, glass plate, calibration
certificate, protective rubber holster with belt clip,
wrist strap, 3 AAA alkaline batteries, instructions,
protective lens shield, convenient hard shell
carrying case, USB cable, PosiSoft Software, and
two (2) year warranty.

Menu Operation

Menu Operation
Next Page
Up
Down
Probes
Probes
Press the (+) button to switch
pages in a multipage menu.
Press the (-) button to return to
the previous menu or page.
Select Exit to exit from any
menu.
Sleeve
Indentor Foot
2
Indentor