DeFelsko PosiTector BHI Guía Rápida página 9

Test Time
The PosiTector BHI has an on-screen timer to measure the
hardness of a material after a given period of time.
Use the (-) and (+) buttons to adjust the test duration. When
taking a reading, the timer starts automatically once the indentor
is on the surface and the ▼ symbol appears on the display.
Increases the displayed resolution. Accuracy is not affected.
Cont. Reading
When enabled, the Gage will continuously display probe readings.
Ideal when a test timer is not required or when performing a
calibration verification. Cont. Reading is not available when
Memory, Statistics or HiLo Alarm modes are enabled.
Battery Type
Selects the type of batteries used in the Gage from a choice of
"Alkaline", "Lithium"
rechargeable). If "NiMH" is selected, the Gage will trickle charge
the batteries while connected via USB to a PC or optional AC
power supply (USBAC). The battery state indicator symbol
calibrated for the selected battery type. No damage will occur if the
battery type used in the Gage does not match the selected battery
type.
A statistical summary will appear on the display. Remove the last
reading by pressing the (-) button. Press (+) to clear statistics.
Average
Maximum Value
HiLo Alarm
Allows Gage to visibly and audibly alert the user when readings
exceed user-specified limits.
(Continuous Reading)
or "NiMH"
Statistics Mode
Statistics Mode
7
(nickel-metal
Standard Deviation
Minimum Value
hydride
is