DeFelsko PosiTector BHI Guía Rápida página 13

NOTE:
PosiSoft Desktop is required when using USB
connections to synchronize measurements with PosiSoft.net.
Bluetooth
Allows individual readings to be sent to a computer, printer or
compatible device as they are taken using Bluetooth wireless
technology. See www.defelsko.com/bluetooth
Bluetooth Smart
Sync Batches
Select batches to flag them for synchronization to the
PosiTector App. New batches created while Bluetooth Smart
is enabled are automatically selected.
With Bluetooth Smart enabled, select Sync Batches to transfer
selected batches to the PosiTector App. This is useful when
switching between smart devices, as only readings and batches
that have yet to be synchronized with any smart device are
synchronized automatically.
If Bluetooth Smart is disabled, data from batches
selected in the Sync Batches menu are held in a queue until
communication with the PosiTector App is re-established.
Send Batches
Transfers selected
when switching between devices).
The Send Batches option is visible in the menu when the Gage
is connected to a smart device running the PosiTector App.
Determine if a software update is available for your Gage.
See www.defelsko.com/update
an update. All stored measurements will be erased from memory.
(Advanced models only)
(Advanced models only,
serial numbers 784000 and greater)
batches to the PosiTector App (useful
The Gage will perform a Hard Reset (pg. 6) after
11