Menu Operation; How To Measure - DeFelsko PosiTector PC Guía Rápida

Gage functions are menu controlled. To access the Menu,
power-up the PC Probe and PosiTector body, then press the
center navigation button.
Navigation Button
Up
Center
Down
NOTES:
The center
unintentional power-up.
When no probe is attached, a limited menu will be displayed.
Connect probe for full menu.
Power-up both units. Bring the probe to within 5 cm (2 inches) of
the coating powder.
Press and hold the
While watching the probe display, align the Distance Paddle with
the Distance Target Bar. (pg 3)
While the probe button is depressed, probe distance and angle
should be varied slightly keeping:
(a) the Distance Paddle close to the Distance Target Bar
(b) the Amplitude Indicator at maximum height (pg 3).
Release the
thickness measurement on either display.

Menu Operation

Menu Operation
To navigate, use the Up and Down buttons to
scroll and
Select Exit to exit from any menu.
button is purposely recessed to help eliminate

How to Measure

How to Measure
button. Bring the probe closer to the powder.
button when you hear a double BEEP or see a
to SELECT.
2