Control Panel; Console Onboard The Machine; X-Ray Emission Remote Control - Myray hyperion X5 Manual De Operador

4. CONTROL PANEL

4.1. CONSOLE ONBOARD THE MACHINE

The control panel (console on-board the machine) allows controlling the X-ray device.
The control panel consists of 5 buttons with functions to move parts of the X-ray device (column, craniostat, laser
traces) used to position the Patient.
2 LEDs on the control panel indicate the system status:

4.2. X-RAY EMISSION REMOTE CONTROL

The system can be equipped with a remote control to activate X-ray emission.
When the system is Ready (green LED steady-on), you can start X-ray emission by pressing the button on the remote
control and holding it down for the entire duration of the examination.
During the examination, the yellow LED on the remote control turns on and simultaneously an acoustic signal is emitted.
Button pressed
If the button is released before the examination is completed, the image acquisition will be interrupted.
22
Control panel area
Button
RGB LED
If the X-ray device is ready, the green LED is on.
If the X-ray device is on and working, the LED is blue.
If the X-ray device is in standby, the LED is blue and flashing. If the machine is in error, the LED is red.
The yellow LED on the right comes on when X-ray emission is in progress.
The remote control features:
1) A button to confirm the X-ray emission
2) Two LED lights
a. Green (machine ready for emission)
b. Yellow (X-ray emission in progress)
OPERATOR'S MANUAL
Description and use
Confirm button
Column up movement
Column down movement
Vertical Laser Positioning -
canine or condyle cusp for patient framing (+)
Vertical Laser Positioning -
canine or condyle cusp for
patient framing (-)
Button released
EN