Connecting To Csnet Web In Order To Configure The Software - Hitachi CSNET WEB Manual De Instalación Y Funcionamiento

CSNET WEB
Installation & Operation Manual
4. The "Time, date & zone configuration" screen will be
displayed.
Enter the date and time.
Select the geographical area nearest the installation.
Click "Next" in order to configure CSNET WEB.
The installation programme will display the following
message as a reminder that 2 minutes are required to apply
the configuration.
Once CSNET WEB's TCP/IP configuration is finished, the
installation software will return to the initial screen.
5.2. Connecting to CSNET WEB to
configure the software
This option lets you change the PC network settings temporarily
and connect to the CSNET WEB interface.

Warning:
We recommend that you do not configure the software
without configuring the CSNET WEB interface first.
1. Select Connect to CSNET WEB for Configuration, press
Next and the Select Network Card window appears,
showing the network adaptors available in your PC.
2. Select the network adaptor you are going to use and press
Next.
We recommend you choose Local area connection if the
system does not already have a specific network (the network
administrator will help you make the correct choice).
Page 7
OK
PMML0163A-rev.0 - 03/2008
< Back Next > Cancel
< Back Next > Cancel
< Back Next > Cancel