Readjusting The White Balance; Changing The Angle To Letter/A4 Size; Freezing An Output Image - Canon RE-455X Manual De Instrucciones

Readjusting the White Balance

Readjust the white balance manually when the color tone seems unnatural or if you want to change it to
your desired tone.
Follow the procedures below.
Press the WHITE BALANCE button (to turn on manual mode).
Turn the WHITE BALANCE knob to adjust to the desired color
tones. Turning the knob toward the RED side increases the red
tones. Turning the knob toward the BLUE side increases the
blue tones.
If you cannot readjust the color tone, remove the document,
press the WHITE BALANCE button, and execute steps
again.

Changing the angle to Letter/A4 size

To make the view accommodate Letter/A4 size, press the ZOOM PRESET button. The output image size
will become Letter/A4 size.
If the ZOOM PRESET button is pressed, the indicator lights up.
Use the ZOOM buttons to change the angle.
The set angle may be slightly different from Letter/A4 size.

Freezing an output image

To pause a moving output image, press the STILL PICTURE button. The output image will change from a
movie to a frozen image.
The STILL PICTURE indicator lights up while the image is frozen.
If you press the STILL PICTURE button again, the frozen image will
start moving again.
You cannot make adjustments such as zoom, focus, or white balance while an
image is frozen.
13
Operation panel
POWER
LIGHT
INPUT SELECT
WHITE BALANCE WHITE BALANCE
CAMERA
RGB IN
AUTO AUTO
and
Operation panel
ZOOM
FOCUS
MANUAL
AUTO
WIDE TELE
NEAR FAR
D
Operation panel
ZOOM
FOCUS
MANUAL
AUTO
WIDE TELE
NEAR FAR
D
EXPOSURE
MANUAL
WHITE
PAPER
RED BLUE
LOW HIGH
STILL
ZOOM ZOOM
PICTURE
PRESET PRESET
STILL STILL
ZOOM
PICTURE PICTURE
PRESET