Moving Recorded Tracks; Move Function; Labelling An Md - Sony MDX-C800REC Manual De Instrucciones

Notes
• The name applied to the first of the original
tracks will be labelled on the combined track.
• "Impossible" appears if the unit cannot combine
the tracks because the MD has been edited too
many times. This is due to the system limitation
of MDs and is not a malfunction of the unit.

Moving recorded tracks

— Move function

Using the Move function, you can change the
order of the tracks recorded on an MD. When
you move tracks, the tracks are automatically renumbered.
Example: Moving track C to position 2.
Track
number
1 2
Original
tracks
1 2
Move
1
While playing the MD you want to edit,
press (MENU).
2
Press either side of (DISC/PRST)
repeatedly until "Move" appears.
3
Press (ENTER).
4
Select the track you want to move.
1 Press either side of (SEEK/AMS)
repeatedly to select the track.
Selected track No.
2 Press (ENTER).
26
3 4
Move track C to the
second position.
3 4
5
Select the track number to which you
want to move the track.
1 Press either side of (SEEK/AMS)
repeatedly to select the track number.
Selected new track No.
2 Press (ENTER) to move the track.
"Complete!" appears, and the selected
track is moved.
6
To continue moving tracks, repeat steps
4 and 5.
7
Press (MENU) twice.
To cancel the moving procedure, press
(MENU) twice anywhere before step 5.

Labelling an MD

You can label your recorded MDs and tracks.
You can enter up to 1,700 characters as labels
per disc (disc title and track title included).
Note
Repeat play, shuffle play, and programme play will
be suspended until Name Edit mode is over.
Labelling a track
1
While playing the MD you want to edit,
press (MENU).