DVD 569 HC - GB
28.08.2003 10:52 Uhr
PREFERENCE SETUP
The DVD player must be in the stop mode or have the
DVD door open to access the preference menu. To put
the player in the stop mode, you must press the STOP
button twice.
TV Type
According to the system of TV to be connected, set the
type of the video output to match the TV.
1. If the TV used is PAL, select PAL output signal;
2. Select MULTI if the multi-system;
3. If it is NTSC, select NTSC output signal.
Note:
To obtain the best DVD picture, it is strongly recommen-
ded to use Multi-system TV to play DVD movies at 'multi'
mode
PBC
When PBC is on, the TV display the menu..
AUDIO/SUBTITLE/DISC MENU
The DVD player will play with your selected language at
the AUDIO SUBTITLE or DISC MENU. If the disc not re-
corded your selected language, the played will use
defaults of the disc.
34
Seite 34
PARENTAL CONTROL
When selecting one of the PARENTAL items, the screen will
be changed to the PASSWORD VERIFY PAGE.
When playing disc with parent lock function, you may select
an age control grade according to grade of di-
sc and your desired. For example: Select PG-
R, you could see picture like right, input the
password to set the parental level, and then
you cannot play DVD video disc rate higher
the PG-R grade. Parental control grades are listed from low
too high, kids is lowest grade adults is the highest grade.
RESET
If you select the RESET, each function setting returns to
the initial status setting by the factory.
PASSWORD SETUP
PASSWORD MODE Picture
If you want to change the PASSWORD MODE, you must
input password.