Audio Setup; Spdif Output; Video Setup - Clatronic DVD 569 HC Instrucciones De Servicio

DVD 569 HC - GB 28.08.2003 10:52 Uhr

AUDIO SETUP

Speaker Setup
Press UP/DOWN CURSOR to select the items in the
Speaker Setup.
DOWNMIX
• 2.1 CH or 2.0 CH:
If the DVD works with 2.1ch speakers or connect to
TV, you should choose these.
• 5.1 CH:
When the DVD works with 5.1ch speakers, you should
choose the best.
• There are right and left channels working in the tuner
status.

SPDIF OUTPUT

Press the LEFT button go back to the Audio Setup Page,
then use up/down to select SPDIF setup.
• OFF:
the output signal is Analog format, the default setting.
You should select this when you are playing the disc
through the LINE OUTPUT Right & Left jacks on your
DVD player. No signal output from the coaxial port
when selecting this function.
• SPDIF/RAW:
Select this when the DVD player is connected with a
power amplifier through DIGITAL OUT coaxial or opti-
cal port. The power amplifier to be connected must ha-
ve Dolby Digital decoding.
Seite 33
•
Channal Delay
It is now possible to adjust the signal delays. This means
that in the case of large rooms the sound of the front
loudspeakers reaches the ear later than the sound from
the surround loudspeakers. In this case the sound from
the surround loudspeakers has to be played back after a
delay so that an acoustic balance is produced.
BASS AMPLIFICATION (not shown)
When the function BASS AMPLIFICATION is turned to
"ON" the deep tones are amplified.

VIDEO SETUP

Component
You will get CVBS,RGB, YUV or P-SCAN of Component
signal if you choose different item .
•
•
•
•
NOTE:
In the interlacing television broadcasts, if you select the
P-SCAN in the TV MODE. The interlacing television will
not broadcast the pictures, the pictures will disappeare.
then press the V-MODE button on the remote control. You
will go back to the other mode.
SPDIF/PCM:
Select this when the DVD player is connected with a
2-CHANNEL DIGITAL MODE or STEREO
AMPLIFIER. When a Dolby Digital or MPEG disc is
played, the coaxial port will output in PCM 2-channel
format. These program features an uncompressed di-
gital stereo sound track for improved fidelity, when
played, discrete stereo sound will be heard from the
front right and left speakers.
CYBS: The video signal output has video and S-
video.
YUV: The video signal output has video, S- video and
YUV.
SCART/RGB: The video signal output has video, S- vi-
deo and RGB(SCART).
P-SCAN: The video signal output only has P-SCAN.
33