Advanced Bionics Naida Cl Q70 Manual De Instrucciones página 19

6
From this menu press the downward
arrow button to highlight the Scan for
Devices option.
8
There will be a green circle with a
checkmark in it to show that it is paired.
On the AB myPilot you can press the center button to return to the Home screen.
9
To un-pair the AB myPilot and Naída CI:
1
Using the AB myPilot remote control,
press the center button to be taken to
the Main Menu. from this menu, click the
downward arrow button to highlight the
Setting option. Press the center button
again to select.
If you wish to un-pair only one of the Naída CIs that you currently have paired, highlight
3
the Pair Devices option and press the center button.
34
Naída CI Sound Processor User Guide
7
When the Naída CI is found, it will
show the recipient's initials on the AB
myPilot, as well as the ear it is primarily
programmed for.
2
From the next menu that is shown, use
the downward arrow to highlight the
Pairing option and press the center
button again to select.
The screen will tell you which devices are paired by showing a green circle with a checkmark
4
in it beside the recipient's initials. Move to highlight the device you would like to un-pair using
the downward arrow. Press the center button once you have highlighted the device.
The green circle with the checkmark will disappear, and the device will be un-paired and
5
will no longer be controlled by the AB myPilot remote.
6
If you wish to un-pair all devices at
once, from the pairing menu, press the
downward arrow button to highlight the
Clear Pairing option. Press the center
button to select.
8
Pressing the center button will clear
pairing for all Naída CIs that are paired
to the AB myPilot.
Be advised that placing the AB myPilot within a 0.4 inch (1cm) range of
CAUTION:
the Naída CI will cause the Naída CI to lose communication with accessory devices
such as the AB myPilot and/or the ComPilot. At this time, the AB myPilot will not be
able to communicate with the Naída CI. The Naída CI will have to be power cycled
(restarted by removing and replacing the power source) in order for the AB myPilot
to resume communication with the sound processor.
The AB myPilot is intended to work at an arm's length from the Naída CI.
7
The device will then ask you to confirm this
command. You can confirm it by selecting
Confirm and pressing the center button.
35
Naída CI Sound Processor User Guide