Maintenance - Orbis VIARIS UNI Manual De Usuario

ENG
For the card configuration to be upload to our VIARIS charger you must press
Save.
In this way we leave the charger configured so that only the loading permission
is activated through the RFID cards that we have registered.
Available video of the procedure for adding RFID cards (in Spanish):

MAINTENANCE

In the design of the equipment it is envisaged that maintenance will be very low
depending on the long life of their components, limited to cleaning tasks,
checking the operation and checking the input voltage values. An inspection of
the equipment is recommended once a year.
For cleaning and checking the equipment connections it is very
important that you are disconnected from the power supply voltage.
Any handling involving the opening of the equipment shall be carried
out by staff with sufficient technical qualifications and duly authorized.
To clean the exterior of the equipment, it is recommended to use a
soft and dry cloth, for example a microfiber cloth. Do not use abrasive
materials or detergents.
90