Description - Orbis VIARIS UNI Manual De Usuario

ENG

DESCRIPTION

VIARIS UNI smart chargers have a set of embedded elements that are required
to connect the electric vehicle (EV) to the electrical supply in order to recharge.
The VIARIS UNI has been designed with a robust IK10 casing, which requires
easy wall mounting and is extremely easy to use.
The operating status of the charger is always visible through its indicator lights.
The VIARIS UNI includes a load modulator that allows the user to adjust the
power of the device according to the contract in the electrical installation. This
modulator allows the VIARIS UNI to regulate the power supplied to the electric
vehicle depending on the total consumption of the installation. This prevents
unnecessary over-costs and reduces the risk of over-currents in the network.
VIARIS UNI chargers perform the charging of electric vehicles via a connection
cable (hose) with Type 2 connector, and with charging modes 3 (load modes
are specified in EN 61851-1).
The charger allows a time schedule programming through the app or the web
platform, of a period of time in which the charging will be carried out to take
advantage of the electricity rates.
Optionally the VIARIS UNI can have an additional Schuko socket (load modes
1 and 2) limited to 14 A.
The Schuko is not controlled with the modulator but can be connected and
disconnected by the App or the web, and the App shows the current it
consumes and its state. If you exceed 14 A for 5 seconds it will disconnect, and
to connect it we must use the App or the embedded web.
It has a series of optional accessories that complement the functionality of the
equipment, in addition to the VIARIS app for mobile, available on Google Play
and App Store for free.
66