Orbis VIARIS UNI Manual De Usuario página 73

ENG
Connection of the load modulator
Open the TMC100 transformer (included) and couple/clamp it on the phase
conductor (L) so that it measures the total consumption of the house and the
charger VIARIS UNI.
RESPECT THE SENSE OF CURRENT INDICATED ON THE TMC100 LABEL.
It should not be used in installations with currents exceeding 100 A,
the measurement and therefore modulation may be incorrect.
HOUSEHOLD +
CHARGER
I máx 100 A
Single phase connection
TMC100-
TMC100+
Connect the output of the TMC100 to the plug-in terminal block connector
supplied and connect to the VIARIS UNI control circuit.
Must be used twisted pair cable with section 0.25-0.5 mm², maximum
length 1000 m, with a peeling of 6-7 mm, and torque of 0.2 Nm.
VIARI UNI
CIRCUIT
L
- TMC100-
TMC100+
HOUSEHOLD +
CHARGER
HOUSEHOLD
METER
Three-phase connection
L3
3
-
+
72
I máx 100 A
L
HOUSEHOLD
METER
L2
2
-
+
L1
1
-
+