Orbis VIARIS UNI Manual De Usuario página 74

ENG
Respect the indications in the image so that the measurement is correct.
Configuration according to the power contracted
To configure the rated power of the installation, use the rotating knob on the
rear face of the front, or programming by App or embedded web. For app or
web programming to take effect, the rotating knob must be in the "NO LIMIT."
position.
The position of the rotating knob defines the maximum current of the
installation; this parameter must be configured according to the rated power in
the installation as shown in the following table.
This adjustment is fundamental for the correct operation of the load modulator.
73