Wilo Stratos MAXO Instrucciones De Instalación Y Funcionamiento página 43

en
154
Put into operation
NOTICE
1
There is an arrow above or below the visible menu items if there are more than
four sub-menu items. Turn the operating button in the corresponding direction to
open the sub-menu items on the display.
1
An arrow above or below a menu area indicates that additional sub-menu items are
available in this area. These sub-menu items are accessible by turning
ating button.
2
An arrow towards the right in a sub-menu item indicates that another sub-menu is
available. Press the operating button to open this sub-menu.
If there is no arrow to the right, press the operating button to open a settings dialogue.
3
A note above the Context button shows specific functions of the Context menu.
Press the Context menu button
NOTICE
Briefly press the Back button
Briefly press the Back button
there is an error, press the Back button
"Error messages [} 210]").
If an error has occurred, press and hold the Back button
settings dialogue to return to the Home screen or error display.
Settings dialogues
Settings dialogues have been highlighted with a yellow frame and show the current
setting.
Turn the operating button to the right or left to adjust the highlighted setting.
Press the operating button to confirm the new setting. The focus returns to the menu
you opened.
If you do not turn the operating button before pressing, the previous setting remains
unchanged.
One or more parameters can be set in the settings dialogues.
▪ If only one parameter can be set, the focus returns to the menu you opened after hav-
ing confirmed the parameter value (pressing the operating button).
▪ If several parameters can be set, the focus changes to the next parameter after having
confirmed a parameter value.
If you confirm the last parameter in the adjustment dialogue, the focus returns to the
opening menu.
Press the Back button
changed value will be discarded because it had not been confirmed.
Press the operating button to check set parameters and switch between them. In this
process, existing parameters are once again confirmed, but not changed.
to open the Context menu.
in a sub-menu to return to the previous menu.
in the main menu to return to the Home screen. If
to return to the error display (section
to return the focus to the previous parameter. The previously
the oper-
(> 1 second) from any
WILO SE 2018-11