Setting The Speakers And Subwoofer Information Manually-Manual Setup - JVC RX-ES1SL Manual De Instrucctiones

Speaker settings
When selecting "MEDIUM ROOM,"
• Center speaker delay time
is set to1 msec.
• Surround speakers delay time
is set to 2 msec.
When selecting "LARGE ROOM,"
• Center speaker delay time
is set to 0 msec.
• Surround speakers delay time
is set to 0 msec.
Setting the speakers and subwoofer
information manually—Manual Setup
You can set the following speakers and subwoofer information
manually as you prefer. When you change your speakers, register the
information again.
• Subwoofer information—SUBWFR
• Speaker size—FRNT SP, CNTR SP, SURR SP
• Speaker delay time—CNTR DL, SURR DL
• Crossover frequency—CROSS
• Low frequency effect attenuator—LFE
• Dynamic range compression—D.COMP
Operating procedure
DIMMER SETTING ADJUST SURROUND
DVD MULTI DVD
STANDBY / ON STANDBY
On the front panel ONLY:
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
1
Press SETTING.
MULTI JOG now works for the setting operation.
2
Turn MULTI JOG until the setting item you want
to set appears on the display, then press SET.
• As you turn MULTI JOG, the indication changes as follows:
ANALOG L R
SUBWFR
SUBWFR FRNT SP
CNTR DL
SURR SP
LFE
CROSS
DIGITAL IN
AUTO SR
DBS VIDEO
QUICK SETUP
(Back to the beginning)
18
C
2.7 m
2.4 m
2.1 m
C
3.0 m
SOURCE SELECTOR MASTER VOLUME
/ MULTI JOG
SET / TUNER PRESET
DBS VCR TV FM / AM
VOL
CNTR SP
SURR DL
D.COMP
DVD VIDEO
3
Turn MULTI JOG to select the appropriate setting
for the item selected in step 2 , then press SET.
Your setting is stored.
ANALOG L R
EX.: When selecting "NO" for "SUBWFR."
4
If you would like to set other items, repeat steps
2 and 3 .
Setting the subwoofer information
— SUBWFR (subwoofer)
Register whether you have connected a subwoofer or not.
YES*: Select when you have connected a subwoofer.
The subwoofer speaker indicator (
on the display (see page 15). You can adjust the
subwoofer output level (see page 22).
NO: Select when you have not connected or have
disconnected a subwoofer.
* Initial setting
Setting the speakers size
— FRNT SP (front speakers), CNTR SP (center
speaker), SURR SP (surround speakers)
Register the sizes of all the connected speakers.
LRG (large): Select when the cone speaker size is larger than
12 cm.
SML (small)*: Select when the cone speaker size is smaller than
PHONES
12 cm.
NO: Select when you have not connected a speaker. (Not
selectable for the front speakers.)
* Initial setting
NOTES
• If you have selected "SML (small)" for the front speaker size, you
cannot select "LRG (large)" for the center and surround speaker
sizes.
• If you have selected "NO" for the subwoofer setting (see above and
page 17), you can only select "LRG (large)" for the front speaker
size.
VOL
SUBWFR ) lights up