Connecting Other Video Components - JVC RX-ES1SL Manual De Instrucctiones

Connecting other video components

Turn off all components before making connections.
• Illustrations of the input/output terminals are typical examples. When you connect other components, refer also to their manuals since the
terminal names actually printed on the rear vary among different components.
Notes for video connection:
• You can use composite video cord or S-video cord for connecting the VCR to this receiver.
• You can use component video cord in addition to composite video cord and S-video cord for connecting your DVD player, TV and DBS tuner
to this receiver.
• By using S-video cord or component video cord, you can get a better picture quality—in the order: composite < S-video < component.
• To view the picture from the DVD player, DBS tuner or VCR on your TV, connect your TV to this receiver using the same type of cord for
connecting the DVD player, DBS tuner or VCR to this receiver.
TV connection
DO NOT use a TV through a VCR or a TV with a built-in VCR; Otherwise, the picture may be distorted.
Connect using one of the video terminals.
DVD IN DBS IN MONITOR
OUT
VIDEO
Y
DVD DBS
OUT
IN IN
(REC)
P
B
P
R
COMPONENT VIDEO
FM 75
AM LOOP
FRONT
DVD
DVD IN DBS IN MONITOR OUT
ANTENNA R L
IN
VIDEO
Y
SUB-
DVD DBS
COAXIAL
AM EXT AUDIO WOOFER
IN IN
CENTER
L P
B
R P
R
AV DBS VCR TV SURR (REAR)
OUT IN
COMPONENT VIDEO
COMULINK-III RIGHT LEFT
IN (REC) (PLAY) IN
AUDIO
L
R
DBS VCR TV
OUT IN
IN (REC) (PLAY) IN
About VIDEO SIGNAL SELECTOR on XV-NK58SL
VIDEO SIGNAL
SELECTOR
NTSC
525 p
PAL 525i
Selecting PAL or NTSC
Set the PAL/NTSC selector on the rear panel to "PAL" or "NTSC" to
match the color system of your TV. Make sure that the color system
of a DVD VIDEO/SVCD/video CD disc labeled on the package
matches your TV.
If you use a multi-color system TV, you can play discs recorded on
both PAL and NTSC systems by setting the PAL/NTSC selector
appropriately.
• Change the PAL/NTSC selector position in stop mode or with no
disc inserted. The changed setting is not effective if you change
the selector position in playback mode.
VCR
IN
(PLAY)
VIDEO
MONITOR OUT
Composite video cord (not supplied)
S-VIDEO
CENTER SURROUND FRONT
DIGITAL 3 DIGITAL 1
SPEAKER SPEAKERS SPEAKERS
(TV) (DVD)
RIGHT LEFT RIGHT LEFT
VCR
OUT IN
(REC) (PLAY)
VIDEO
DIGITAL IN
DIGITAL 2 (DBS)
MONITOR OUT
CAUTION:
SPEAKER
IMPEDANCE
SUBWOOFER
8 ~ 16
OUT
S-VIDEO
RX-ES1SL
REMOTE
Component video cord (not supplied)
Green Green
Blue Blue
Red Red
S-video cord (not supplied)
Stereo audio cord (not supplied)
Selecting the 525i/525p/REMOTE selector position
You must change the 525i/525p/REMOTE selector position while
the player power is off. Otherwise, the changed setting is not
effective.
• If your television equipped with component jacks does not support
the progressive scanning mode, set the selector to "525i."
• If your television equipped with component jacks supports the
progressive scanning mode, set the selector to "525p."
• If you want to select the scanning mode between the interlace and
progressive modes (depending on the source condition, or when
connecting more than one television, etc.), set the selector to
"REMOTE."
Getting started
LEFT
RIGHT
TV
OUT
AUDIO
CONTINUED ON THE NEXT PAGE
9