Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SECTION 3:
INSTALLATION
3.1 Selecting a Location
Be sure to locate the plasma cutter according to the following guidelines:
•
In areas, free from moisture and dust.
•
Ambient temperature between 32°F (0°C) to 104° F (40° C).
•
In areas, free from oil, steam and corrosive gases.
•
In areas, not subjected to abnormal vibration or shock.
•
In areas, not exposed to direct sunlight or rain.
•
Place at a distance of 12" – 18" (300 - 460mm) or more from walls or similar
that could restrict natural air flow for cooling
3.2 Environment
These units are designed for use in environments with increased hazard of
electric shock. Examples of environments with increased hazards are:
A. In locations in which freedom of movement is restricted, so that the operator is
forced to perform the work in a cramped (kneeling, sitting or lying) position
with physical contact with conductive parts.
B. In locations which are fully or partially limited by conductive elements, and in
which there is a high risk of unavoidable or accidental contact by the operator.
C. In wet or damp hot locations where humidity or perspiration considerably
reduces the skin resistance of the human body and the insulation properties of
accessories.
Environments with increased hazard of electric shock do not include places
where electrically conductive parts in the near vicinity of the operator, which can
cause increased hazard, have been insulated.
3-1
Tabla de contenido
Solución de problemas
