Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Table 4. Troubleshooting Humidifier. (Continued)
Low
humidity
High
humidity
HE240, HE280 HUMIDIFIER AND INSTALLATION KIT
Furnace blower
not operating.
Rapid air changes.
Drafts (cold air is
dry and is an
added load to the
humidifier).
Damper in
"summer" position
Condensation on
walls.
Heavy
condensation on
windows.
• Reset circuit breaker or check for blown fuse.
• Check that the furnace power is on.
• Check all external wiring connections.
• Check the humidity control setting.
• Verify that pressure switch tubing isn't
pinched or obstructed.
• Call a professional heating contractor.
• Keep doors and windows closed.
• Close fireplace damper when not in use.
• Keep exhaust fan running time to a minimum.
• Seal around doors and windows.
• Set damper blade to "winter" position to allow
humidification.
• Turn off humidity control and water until
condensation is completely evaporated.
• Turn humidity control down low enough to
eliminate condensation caused by moisture
from bathing, mopping, cooking, etc. If
moisture persists, more ventilation is needed.
19
69-2685ES—01
Tabla de contenido
