Setting The Timer - Technibel Ulisse 13 Eco R32 Instrucciones De Uso

SETTING THE TIMER

There are four timers that can be selected on the remote con-
trol.Two daily timers (designated as T1,T2) ,and two optional
weekend timers (designated as WKT1, WKT2) .Each timer can
be selected by pressing TIMER button.
The daily timers T1 and T2 can be set for ON and OFF sepa-
rately for two different time periods.
Timer setting will not change until new setting is input.
The weekend timers WKT1 and WKT2 can be set for ON and
OFF separately for two different time periods and they are
effective two days only. These timers will be effective on the
day of setting and on the day after only.
At 24:00 on the second day, the WK timer will not be effective
anymore and the daily timer will be effective again.
WKT1 - effective on the setting day
WKT2 - effective one day after the setting day.
NOTE:
1. During the weekend timer operation, the daily timers will
be disabled.
2. The WK timers must be reactivated before every weekend.
A) HOW TO SET THE OFF TIME
1. Press the TIMER button to select the desired timer.
2. Press the SET and CLEAR buttons till the OFF sign blinks.
3. Press the + or - (HOUR) button until the desired value is
displayed.
4. Press the SET button to activate the timer.
B) HOW TO SET THE ON TIME
1. Press the TIMER button to select the desired timer.
2. Press the SET button till the ON sign blinks.
3. Press the + or - (HOUR) button until the desired value is
displayed.
4. Press the SET and CLEAR buttons to activate the timer.
C) HOW TO SET A PROGRAM FOR DAILY ON/OFF OPERA-
TION (OR VICEVERSA)
1. Press the TIMER button to select the desired timer.
2. Press the SET button till the ON sign blinks.
3. Press the + or - (HOUR) button until the desired value is
displayed.
4. Press the SET button again, the OFF sign blinks.
5. Press the + or - (HOUR) button until the desired value is
displayed.
6. Press the SET button to activate the timer.
D) HOW TO CLEAR THE TIMER
1. Press the TIMER button to select the timer.
2. Press the CLEAR button if you want that every timer opera-
tion will be cleared.
NOTE
If the procedure to set the timer is not completed, by pushing
the SET button, within 15 seconds the timer operation will be
cancelled and the last set-up is restored.
EG
7