Idiomas disponibles
Idiomas disponibles
To pour the beverage from the flask move the
pump lock right to the position "OPEN". Place
the glass or cup under the pump lid outlet and
press on the pump to start the pump operating.
The beverage with be pumped into the container.
Press on the pump push button enough times to
obtain a required amount of the beverage in the
container.
Close the pump lid safety lock (move the pump
lock left to the position "CLOSE".
To maintain the required temperature of the beverage inside the flask it is
recommended to warm up the flask, or cool it down for cold drinks. To obtain the
optimal temperature inside the flask, depending on the drink, rinse the inside of the
flask with hot or cold water, or leave the water inside the flask for some time before
filling it in with the required beverage to be stored in for longer time.
Do not store any carbonated drinks, or keep any milk products or baby food in
the flask to avoid the possibility of bacteria growth.
Before you pour in water or tea into the flask that was used before to store coffee
clean the flask thoroughly to remove any traces of coffee taste.
Cleaning
•
Clean the lid with the pump with warm water and mild cleaning agent. Rinse
thoroughly with clean water.
•
To make the cleaning easy the lid
with the pump may be entirely
removed from the flask. Open the
lid by pulling the lock upwards.
•
Press on the catch located in the
middle of the lid fixing and lift up
the lid with the pump.
- 7 -
