Tristar BL-4010 Manual De Usuario página 4

Instruction manual
use of the device with the chopping blade
• Place the base (no. 5) on a flat stable surface and not
near a sink filled with water or something, make sure
the plug is not placed in the socket and the speed
selector (no. 6) is selected on the 0 mode.
• Place the bowl (no. 4) on the base and turn it counter
clockwise until you hear a click, otherwise the device
will not work for safety reasons. Place the chopping
blade (no. 9). Place the ingredients in the bowl.
• Turn the lid counter-clockwise on the can and make
sure the appendix of the lid slides in the safety lock,
otherwise the device will not work for safety reasons.
Safety closure
4
For a slow working select mode 1, mode 2
for faster, 0 for disable mode. For a short fast
operation, select the Pulse mode, you should
continue to hold down the switch in this
position, due to possible overheating of the
engine. Allow the unit to cool down before
further use.
use of the device with the cutting and chopping disk
This appendix should be clicked
in the safety closure
• Place the base (no. 5) on a flat stable surface and
not near a sink filled with water or something, make
sure the plug is not placed in the socket and
the speed selector (no. 6) is selected on the 0 mode.
• Place the bowl (no. 4) on the base and turn it counter
clockwise until you hear a click, otherwise the device
will not work for safety reasons. Insert the supplied
plastic disc (no.2) in the bowl, place the slicing and
chopping disc on the plastic disc. For cutting discs
ensure that the knife is at the top. For grating turn the
disc, so that the grating part is at the top.
Safety closure
• Turn the lid with the filling shaft (no. 1), counter
clockwise, on the can and ensure that the appendix
of the lid slides in the safety closure, otherwise the
device will not work for safety reasons.
For a slow working select mode 1, mode 2
for faster, 0 for disable mode. For a short fast
operation, select the Pulse mode, you should
continue to hold down the switch in this
position, due to possible overheating of the
engine. Allow the unit to cool down before
further use.
• Place the cutting and shredding fruits and vegetables in the filling shaft.
Always use the supplied pistil to press the fruit and vegetables into
the shaft. Never do this with your hands, you can seriously injure by
touching the rotating blades. Also do not use other objects, the device
may malfunction.