Specific Safety Rules - Makita BDF444 Manual De Instrucciones

ENGLISH
1. Red part
2. Button
3. Battery cartridge
4. Switch trigger
5. Lamp
6. Reversing switch lever
7. Speed change lever
8. Action mode change lever
9. Adjusting ring
10. Graduation
SPECIFICATIONS
Capacities
No load speed (min
Overall length
Rated voltage
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to drill
safety rules. If you use this power tool unsafely or
incorrectly, you can suffer serious personal injury.
1. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
2. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
3. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
4. Hold the tool firmly.
5. Keep hands away from rotating parts.
6. Do not leave the tool running. Operate the tool
only when hand-held.
7. Do not touch the drill bit or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
Explanation of general view
11. Arrow
12. Steel band
13. Grip base
14. Side grip
15. Protrusion
16. Groove
17. Sleeve
18. Bit holder
19. Bit
20. Hook
Model
Steel
Wood
Wood screw
Machine screw
High (2)
-1
)
Low (1)
Net weight
BDF444
13 mm
50 mm
6 mm x 75 mm
2.2 kg
D.C. 14.4 V
8. Some material contains chemicals which may be
ENE034-1
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
SAVE THESE INSTRUCTIONS.
GEB001-4
WARNING:
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
IMPORTANT SAFETY
INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product using
battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively shorter,
stop operating immediately. It may result in a risk
of overheating, possible burns and even an
explosion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5. Do not short the battery cartridge:
21. Screw
22. Limit mark
23. Rear cover
24. Screws
25. Arm
26. Spring
27. Recesed part
28. Carbon brush cap
29. Hole
BDF454
13 mm
65 mm
10 mm x 89 mm
6 mm
0 - 1,700
0 - 400
231 mm
2.3 kg
D.C. 18 V
ENC007-4
5