IDENTIFICATION OF MAIN COMPONENTS / SYMBOLS
Maximum noise and vibration levels [1]
Sound pressure level (EN 60745)
– Measurement uncertainty
Guaranteed sound power level (2000/14/EC)
Vibration level (EN 60745)
– Measurement uncertainty
[1]
Notice:
The vibration value indicated was deter-
mined with a standardized tool and can be
used to make comparisons with other elec-
tric equipment as well as temporary esti-
mates of the load through the vibrations.
WARNING!
The vibration value may vary according to
the usage of the machine and its fitted
equipment, and be higher than the one indi-
cated. Safety measures must be established
to protect the user and must be based on the
load estimate generated by the vibrations in
real usage conditions. In this regard, all the
operational cycle phases must be taken into
consideration, such as switching off or idle
running.
2. SYMBOLS
1
5
1) If you are using the machine every day in nor-
mal conditions, you can be exposed to a noise
level of 85 dB (A) or higher. Wear safetyglas-
ses and hearing protection.
2) Warning! Danger. Failure to use this machine
cor rectly can be hazardous for oneself and o -
thers.
3) Read the instruction manual before using the
machine.
4) Do not leave the machine in the rain (or in damp
conditions).
TECHNICAL DATA
Voltage and current
Cutting lenght
Weight
Cutting movements
Max operating time
Battery Charger
Power supply voltage and frequency
Charger voltage and current
Charging time
Accumulator
Accumulator type
Rated voltage
Capacity
2
3
6
7
5) Never throw used batteries into a fire
EXPLO SION RISK!
6) Read all safety warnings and all instructions.
7) Do not expose the accumulator to sunlight
when the temperature exceeds 50°C.
8) Lithium battery. Never dispose of these bat-
teries with household waste.
Model SHT 4620A
dB(A)
dB(A)
dB(A)
m/s
2
m/s
2
Model SHT 4620A
V DC
cm
kg
-1
min
min
Model JY15-217-035
V~ / Hz
V
hours
Model SB2015
Lithium Ion
V / Ah
Wh
4
8
3
EN
82
3
95
2,86
1,5
20
46
2.8
1500
ca. 30
240 / 50
21.7
ca. 3 - 5
20 / 1.5
30