Area Of Application; General Information; Installation Instructions - Westfalia 321 407 Instrucciones De Montaje

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
Towing hitch
GB
Manufacturer: WESTFALIA-AUTOMOTIVE GmbH
Approval no. as per Guideline 94/20/EC:
Class: A50-X
Technical data:

Area of application:

General information:

The vehicle manufacturer's specifications regarding trailer load and nose weight are decisive
for driving, and the values specified for the towing hitch must not be exceeded.
The towing hitch serves for towing trailers fitted with ball couplings and for use with load carriers
approved for attachment to the towing hitch. Any use other than that specified is prohibited. Driving
with a trailer must be adapted to the road conditions. The vehicle's handling is affected when a
trailer is being towed. Follow the vehicle manufacturer's instructions.
The fixing points specified as standard must be observed.
National guidelines concerning official approval of auxiliaries must be observed.
These installation and operating instructions must be enclosed with the vehicle papers.

Installation instructions:

The towing hitch is a safety component and must only be installed by qualified personnel.
Any alteration or conversion to the towing hitch is prohibited, and would lead to cancellation of
design certification.
Remove insulating compound and underseal from vehicle (if present) in the area of the mating
surfaces of the towing hitch. Seal any bare bodywork and bores with anti-corrosive paint.
Operating instructions:
The towing bracket increases demands on the cooling system. The contractual workshop must
be consulted about any necessary conversion measures to be made to the cooling system.
Information can be obtained from the V.A.G. information booklet 'Trailer Operation'.
Again tighten all securing bolts of the towing hitch after approx. 1000 trailer km, observing speci-
fied tightening torques.
The towing hitch must be kept clean and greased. However, if a stabilisation device, e.g. Westfalia
"SSK", is used, the towing hitch must be free from grease. Follow the instructions in the relevant
operating instructions.
As soon as the towing hitch diameter is 49.0 mm or less at any point, it must no longer be used
for safety reasons.
After the towing hitch is fitted, the empty weight of the vehicle increases by 17 kg.
24
Without electrical set
Model:
Maximum D-value:
Maximum nose weight: 75 kg
Vehicle manufacturer: VW
Model:
Model designation:
Westfalia order no.: 321 407
e13 00-0108
321 407
8,2 kN
Golf 07/91
(Front drive, 4-Motion, Cabrio)
1 HX 0, 1 HX 1, 1 EX 0, 1 H, 1 E
Tabla de contenido
loading

Tabla de contenido