Assembly For Top Hung Windows Opening Outwards - GIESSE RACK MAX 450 Manual De Uso E Instalación

For fixing onto PVC window frames: self threading screws for metal Ø4.8 (6
◆
pieces).
Equipment and tools: measuring tape, pencil, drill/screwdriver, set of drill heads for
◆
metal, insert for screwing in, electricians pliers, screwdrivers.

8.2. Assembly for top hung windows opening outwards

A. Pencil in the middle line for the window frame on both
mobile and fixed parts (Fig. 1).
B. Place the motor support bracket in position at the edge of
the fixed part in line with the centre line pencilled in earlier
and pencil in the four openings to be used for fixing (Fig. 2).
C. Use the appropriate drill head to perforate the window
frame and assemble the motor support bracket, taking
care to tighten all screws well (Fig. 3 and Fig. 3bis).
D. Place the front rod in line with the centre line of the mobile
part of the window frame and trace out the three fixing
openings (Fig. 4).
E. Use the appropriate drill head for perforation and
assemble the front bracket, taking care to tighten all
screws well (Fig.5 and Fig. 5bis).
F. Take the clamp screws and assemble them onto the motor
support bracket. Leave at least two turns of leeway.
G. Slide the swallow tailed profile of the actuator onto the
clamp screws, and check they have been inserted
correctly into the socket of the profile to ensure the
actuator runs smoothly along its axis.
H. Position the actuator so the eyebolt head is inserted into
the front bracket. Insert the M6x25 screw into the bracket
and eyebolt and fix the self-locking nut into position using
two 10 keys.
I. Manually move the actuator along its axis to close the
window and press firmly against the seals. Tighten the
clamp screws previously only placed and set the actuator in
line with the window frame. Suggested tightening torque is
5÷7 Nm.
J. The actuator may now be powered up for a complete trial
of opening and closing of the window. After closure, make
sure that the window is completely closed and check the
pressure on all seals.
K. The stroke-end for the actuator is automatic. The appliance exerts a traction force
which guarantees perfect pressure on seals even for windows with large
dimensions.
30
Fig. 1
Fig. 2
Fig. 3
Fig. 3 bis