Instructions For Assembly; Preparation Of Actuator For Assembly - GIESSE RACK MAX 450 Manual De Uso E Instalación

function of cable length is calculated correctly. The following table indicates cable
lengths for an actuator connected at nominal charge.
CABLE SECTION
0.50 mmq
0.75 mmq
1.00 mmq
1.50 mmq
2.50 mmq
4.00 mmq
6.00 mmq
8.

Instructions for assembly

These indications are for specialised technical personnel and basic work and
All preparatory, assembly and electrical connection operations must be performed by
specialised technical personnel to guarantee optimal function and service of the
actuator. Check that the following fundamental conditions have been met:
Before installing the actuator, check that the moving parts of the window on
which it is to be installed are in perfect working condition and that they open
and close properly and are well balanced (where applicable).
Gear motor performances must be sufficient to move the window; any limits
indicated in the technical data table on the product cannot be exceeded (par.
4). Any eventual calculations may be made using the formula on par. 2.1 of this
manual.
Warning: Check that appliance has electrical feeding type equal to the one
provided by checking with the data reported on the label attached to the gear
motor.
Check that the actuator has not been damaged during transport, first visually
and then by working it in both directions.
Transom window frames entail the risk of injury caused by accidental fall of the
window. A compass limit switch or alternative safety system suitably designed
to prevent any accidental falls should be installed.
Note: the RACK MAX 450 can operate on its own, i.e. it cannot be connected to
a drive unit to obtain two thrust points.

8.1. Preparation of actuator for assembly

Before starting assembly of the actuator, prepare the following material for completion,
equipments and tools.
For fixing onto metal window frames: M5 threaded inserts (6 pieces), M5x12 flat
◆
headed metric screws (6 pieces).
For fixing onto wooden window frames: self threading screws for wood Ø4.5 (6
◆
pieces).
110V~
~300 m
~450 m
~600 m
~900 m
~1500 m
~2500 m
~3700 m
safety techniques are not indicated.
Actuator fed at
29
230V~
~1400 m
~2100 m
~2800 m
~4000 m
~6800 m
~11000 m
~15000 m