Construction And Standards; Id Plate And Marking Data - GIESSE RACK MAX 650 Manual De Uso

The opening stroke for the window CANNOT be programmed as it is regulated by the
length of the rod on the reduction motor. The electronic control device allows the rack to
protrude until it encounters an obstacle that blocks its stroke. This could be provided by
the internal lock on the rack or complete closing/opening of the window.
In both outwards and return directions the stroke-end uses a self-defining electronic
process with power absorption, and for this reason, no adjustment is required.

4. Construction and standards

INTENDED USE. The RACK MAX 650 rack actuator has been designed and
manufactured to open and close top hung windows opening outwards, bottom
hung windows, dormer windows, light domes and skylights. Specific use is for
ventilation and airing of areas; any other use is strongly discouraged, with the
supplier of the entire system in any case retaining sole liability.
The actuator is manufactured in accordance with the Directives and following
Regulations listed in the attached Declaration of Incorporation and UE
Conformity.
Electrical connections must conform to regulations in force for the design and
set up of electrical equipment.
To ensure efficient separation from the grid, an approved type of bipolar
"dead-man" switch should be used. An omnipolar general power switch with
minimum distance of 3 mm between contacts should be installed upstream of
the control line.
Application is performed using the brackets provided and any other type of
assembly should be checked with the manufacturer, who will not accept any
responsibility for incorrect or malfunctioning assembly.
The RACK MAX 650 actuator comes packaged in a cardboard container which contains
two pieces. Boxes for tandem actuators each contain all parts required for movement of
windows. Each package contains:
• Nr. 1 110-230V~ 50/60Hz / 24V= electrical actuator
• Nr. 1 Standard support bracket with respective grip and fixing screws
• Nr. 1 Bracket for fixing to the frame
• Nr. 1 Small part packaging
• Nr. 1 Instruction manual

5. Id plate and marking data

The RACK MAX 650 actuators have CE marking and comply with the Standards listed in
the Declaration of Conformity. They also come with a Declaration of Incorporation, due
to their classification by the Machinery Directive as "partly completed machines". Both
declarations are included in the final pages of this manual.
The plate data is displayed on an adhesive label placed on the outside of the casing,
which must remain intact and visible.
The main information it displays includes: manufacturer's address, product name -
model number, technical characteristics, production date and serial number. In the
event of a complaint, please indicate the serial number (SN) displayed on the label.
An explanation of the symbols used on the label to abbreviate the technical
characteristics is given in the table in the chapter on "TECHNICAL DATA".
31