Channel Level - Pioneer DV-868AVi Manual De Instrucciones

Initial Settings menu
1 Use the Joystick to move the cursor
up/down to select a speaker.
• The L and R speakers are paired; you can't
set them differently.
Initial Settings
Digital Audio Out
Video Output
L 3m
Language
C 3m
R 3m
Display
RS 3m
Options
LS 3m
Speakers
SW 3m
i.LINK Setup
2 Move the cursor right to change the
speaker distance for the highlighted
speaker.
3 Use the Joystick (up/down) to change
the distance.
• When you change the distance settings of
the front left (L) or front right (R) speakers,
all the other speaker distances change
relative to it.
• Front left/right (L/R) speaker distances
can be set from 30 cm to 9 m in 10 cm
increments.
• The center speaker (C) and subwoofer
(SW) can be set from –2 m to +2 m
relative to the front left/right speakers.
• Surround left/right (LS/RS) speakers can
be set from –6 m to +2 m relative to the
front left/right speakers.
4 Move the cursor left to go back to the
speaker list if you want to modify another
speaker, or press ENTER to exit the
Speaker Distance screen.
• Speaker Distance settings do not affect
SACD playback.

Channel Level

• Default setting: Fix
You only need to make this setting if you
connected this player to your amplifier using
the 5.1 channel analog outputs.
These settings do not affect any digital audio
output.
Initial Settings
Digital Audio Out Audio Output Mode
Video Output Speaker Installation
Language Speaker Distance
Display Channel Level
Options
Speakers
i.LINK Setup
When set to Fix, the level of each of the 5.1
channel analog outputs is fixed. Choose
Variable if you want to adjust the relative
levels to balance the surround sound better
for your listening room.
Initial Settings
Auto
Digital Audio Out
Video Output
L 0.0dB
Language
C 0.0dB
0.0dB
Display R
0.0dB
RS
Options
0.0dB
LS
Speakers
SW 0.0dB
i.LINK Setup
You can set the individual channel levels
between –6dB and +6dB in 0.5 dB
increments using the test tone output as a
guide to set the correct levels. Adjust the
levels until the output level from all channels
sounds the same from your usual listening
position. Note that Audio Output Mode
(page 73) must be set to 5.1 Channel in order
to use the test tone.
08
Fix
Variable
75
En