Selection Of Filtration Programmes - Teuco Hydrospa 620 Manual Del Usuario

EN

SELECTION OF FILTRATION PROGRAMMES

To change the filtration programme, press the
"◄" button and hold until the required programme
is displayed .
To activate the filter pump manually, independently
of the selected programme, set the filter pump
switch on the control panel to the "MAN" position.
This function can be used when the water needs
filtering in unexpected circumstances. Remember
to return the filter pump switch to the "auto" position
as soon as the water is clean again.
Do not operate the filter pump in manual mode for
more than three hours at a time.
Do not operate the filter pump in manual mode
for more than three hours at a time.
FILTRATION
PROGRAMMES FOR:
HOME USE
When these programmes
are selected, the filtration
and heating systems
always remain off
between 22.00 and 08.00
hours.
INTENSIVE USE
44
DAILY
FILTRATION
TIME
Home-1 3 hours overall
Home-2 4.5 hours overall
Week-end 2 hours Monday to
Thursday 3 hours
Friday, Saturday and
Sunday
Contiunuos-1 6 hours overall
Contiunuos-2 12 hours and more
00:00 01/12/2012
WEEK-END
FILTER ON H O ON
2
TIMER=01 .00 H:M
1
RECOMMENDED USE
For average levels of use:
guarantees low overall energy
consumption but still with good
quality water filtration.
Ideal in a home situation
where the pool is used by
an appreciable number of
individuals .
Ideal for an average level of
home use focused more on
the weekend, and with lower
running costs on days when
the pool is used less.
Intensive level of use, for
example with the pool in the
open air or in use for prolonged
periods .
Particularly heavy and constant
level of use, by numerous
different bathers, where
maximum power and efficiency
of filtration are required.
620