Velleman CAMCOLD23 Manual Del Usuario página 6

7.1 Lens
The LENS menu is not applicable to this camera. You can leave the
settings as they are.
7.2 Shutter/AGC
Use this menu option to control how the camera responds to high
and low light settings using auto-gain and shutter settings. You can
choose automatic or manual control. Automatic control is usually
sufficient for most environments.
Display: SHUTTER/AGC
AUTO MODE = SHUT: the camera adjusts the image by
SETUP changing the shutter speed. You can configure high and
low luminance conditions.
HIGH LUMINANCE: use this to adjust bright images.
• BRIGHTNESS: Set the brightness level for high
Note: if you adjust this setting, we recommend that you
do it when there is a lot of light available.
LOW LUMINANCE: use this to adjust dim images using
automatic gain control.
• MODE: set to AGC to use automatic gain control. Set
• BRIGHTNESS: Set the brightness level for low
If you want to adjust this setting, we recommend that
you do it when it is very dark (night).
Note: AGC can introduce more noise in the image.
MANUAL Use manual mode only in environments with the exact
same amount of light throughout the day. We
recommend using the automatic mode even under such
conditions.
Note: if the scene becomes brighter or dimmer, the
camera will not adjust and the image may be over- or
underexposed.
MODE = SHUT + AGC: you can set the shutter speed
and AGC as specified below:
• SHUTTER: set the shutter speed between 1/50 and
V. 01 – 08/05/2012
CAMCOLD23
luminance mode. Default setting is 24.
to OFF to switch automatic gain control off.
luminance mode.
1/10000. The slower the shutter speed, the brighter
the image. Faster shutter speeds are used if you want
6 ©Velleman nv