TRAPP TRC-40 Manual De Instrucciones página 46

Warning!
Be careful: Gasoline is highly flammable.
Close the tank, thoroughly tightening the cover to avoid leakage.
 
Never fill the tank with the motor on.
 
Switch the motor off before removing the fuel cover.
 
Do not add gasoline while the motor is hot.
 
Ensure that there is oil in the crakcase and that
 
it is at the correct level.
Check whether there is fuel in the tank.
 
Use common gasoline only (do not use
 
gasoline with additives).
Position the throttle lever half way.
 
Carefully pull the retractable start rope until
 
you find some resistance, then pull it all the
way through. Repeat this operation until the
motor starts. This engine has an automatic
choke, injecting gasoline is not necessary.
Allow the motor to heat up for some minutes.
 
Turn the throttle lever to maximum position
 
and start work.
To turn off the motor, return the on / off lever
 
(1) to the starting position. If the engine does
not switch off after returning the throttle lever,
adjust the steel cable (2) advance at the spindle
bolt (3) on the throttle lever; if this does not
solve the problem, turn off the engine using
pliers to disconnect the spark plug cable and
call a TRAPP Service Technician.
46
Operation - TRC-50
Notes:
 
 
 
 
 
2
3
Image merely illustrative.
This motor has no injector, it contains
automatic choke.
This engine has
acceleration system,
greater economy of fuel.
The engine does not respond upon
being accelerated without a load (work
force). The rotation only increases when
the machine is made to work (under no
circumstances should the pressure of
the original spring of the accelerator be
altered).
This motor has a current cutting system
on the throttle lever.
Motor with gas emission certificate.
www.trapp.com.br
1
an automatic
which allows