General Safety Rules; Modifications And Improvements - IPC 1050 Serie Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 55
INTRODUCTION / GENERAL WARNINGS
Welcome on board!
We thank you for choosing IPC and congratulate you for
purchasing the Genius 1050
A sweeper especially designed to guarantee safety and
concern for the environment.
The innovative design, the robust and trustworthy structure
and the recyclable components make Genius 1050. a truly
unique machine.
Before using your machine, we advise you to carefully read
this handbook.
It is an invaluable guide to the characteristics of your machine
and will help you use it correctly. In particular, it provides
precious information concerning safety, integrity and concern
for the environment.
INTRODUCTION
This instruction handbook contains guidelines and practical
information concerning the use, adjustment and routine
maintenance of your new machine.
Your machine has been designed and built to offer the best in
terms of performance, comfort and ease of use in a variety of
different conditions. Before delivery, your machine has been
checked at our factory and by our dealer to guarantee that it is
handed over to you in perfect working order. To maintain the
machine in this condition and ensure problemfree operation,
strictly follow the instructions given in the handbook. Before
attempting to use the machine, read this handbook and keep
it to hand for any future consultation. The words RIGHT and
LEFT always refer to the direction in which the machine is
travelling. If you have any doubts concerning the machine,
do not hesitate to contact your dealer. Dealers will offer
you competent personnel, original spare parts and all the
equipment you will need. NEVER use the machine without
its guards and safety systems. For your safety, make sure all
guards and safety systems are closed and correctly mounted
before starting the machine.

GENERAL SAFETY RULES

To prevent damage and bodily harm, strictly follow the safety
rules below.
Read the safety labels on the machine and do not cover them
for any reason whatsoever. Replace them if they are damaged
or become unreadable.
· The storage temperature ranges from 0° to + 50°C.
· The optimal working temperature should range from 0° and +
40°C.
· The ambient humidity must range from 30 to 95 %.
· Do not use the machine as means of transport.
· Do not use solvents or similar substances to clean the
machine. · Avoid running the brushes when the machine is still,
to prevent damage the floor.
· Do not use the machine to draw up inflammable liquid.
· If fires break out, use a drychemical extinguisher. DO NOT
USE WATER.
· Do not bump against shelves or scaffolding when there is a
risk of objects falling over.
· Adapt the speed of the machine to the conditions of
adherence.
· Avoid using the machine if its stability is not guaranteed.
·If you notice that the machine is not working properly, make
sure this does not depend on failure to carry out the routine
maintenance operations. If this is not your case, contact an
authorised service centre.
· Always use ORIGINAL spare parts. You can purchase these
from a dealer or authorised retailer.
Disconnect the machine from the mains before carrying out
English (Translation of original instructions)
any maintenance operation.
· Do not remove guards that need to be removed with the aid
of tools.
· Do not wash the machine with direct jets of pressurised
water or with corrosive substances.
· Every 200 hours of work, have the machine checked by an
authorised service centre.
· This product is classified as RAEE type special waste and is
covered by the requisites of the new environmental protection
regulations (2002/96/CE RAEE). It must be disposed of
separately from ordinary waste in compliance with current
legislation and standards
Our company policy is based on the continuous improvement
of our products. We therefore reserve the right to apply
modifications and improvements whenever we believe these
are necessary, without having to upgrade the machines
previously sold.
Accidentprevention is also your responsibility.
No accidentprevention plan can be effective without the total
cooperation of the person directly responsible for machine
operation.
Most accidents that occur in a company, during work or
transport are caused by failure to observe the basic rules
concerning safety.
A careful and prudent user is the best guarantee against
accidents and will prove to be much more effective than even
the strictest accidentprevention plan.
During work, pay attention to the persons standing in the area
to clean, especially children.
Make sure the machine is fitted with a plate featuring the
serial number and the CE mark. It is affixed in the position
shown in Fig. If the plate is not in place, contact your retailer
immediately.
- 16 -
Special waste. Do not dispose of
with ordinary waste.

MODIFICATIONS AND IMPROVEMENTS

SAFETY
SERIAL NUMBER – CE MARKING
Tabla de contenido
loading

Este manual también es adecuado para:

Genius 1050 eGenius 1050 dpJet1050Lion 1100

Tabla de contenido