Mode "Wlan Access Point" (Factory Setting) - Zeiss Stemi 305 cam Instrucciones De Manejo

Stereo microscope
Stemi 305 cam
•
The adhesive label on the back of the micro-
scope body (Fig. 4) shows the Wi-Fi identifier
(SSID) set by the factory, and the WLAN
password of the device. SSID and WLAN
password can be changed subsequently via a
WLAN configuration website.
SSID:
WLAN password:
At choice, the mode "Connect to existing WLAN" can be used for camera control (see
chapter 4.1.2).
4.1.1

Mode "WLAN access point" (factory setting)

In this mode, each Stemi 305 cam provides its own WLAN.
In the WLAN settings of the iPad, all Stemi 305 WLAN networks are recognized which are within reach.
After establishing the connection to one of these WLAN networks, the connected Stemi 305 cam appears
as an icon in the Apps Labscope / Matscope and can be controlled via the iPad. Change-over to another
Stemi 305 cam is only possible if the user changes over to the WLAN of the required Stemi 305 cam in
the WLAN settings of the iPad.
Depending on the WLAN and on the image contents, between 3 and max. 6 iPads can be connected to
the WLAN of a Stemi 305 cam, thus being used for viewing live images, for camera control or snapshots.
Due to the delayed live stream and the line loss thus caused, it is not recommended to use more than 6
live streams.
To operate several Stemi 305 cams comfortably (without changing the WLAN network), each
Stemi 305 cam disposes of another operating mode, i.e. the mode "Connect to existing
WLAN" (see chapter 4.1.2).
06/2016
OPERATION OF THE INTEGRATED CAMERA WITH WI-FI
Commissioning the camera
Stemi-xxyyzz
ZEISS1846 [...]
435063-9144-008
Fig. 4 Adhesive label on the back of the
device
ZEISS
9