BERTO'S MACROS 700 Serie Manual De Instrucciones página 64

64 |
E2 20 LIN version compatibility
E2 ΦФ Unknown error
If an error occurs, only the on/off key remains active.
MAINTENANCE
CARE OF THE APPLIANCE
ATTENTION!
- Before cleaning, switch off the unit and let it cool down.
- In the event of electrically supplied units, use the
isolator switch to disconnect the mains.
Carefully, clean the appliance daily to guarantee its proper
operation and long life.
Steel surfaces must be cleaned with a dish washer
detergent diluted in very hot water and a soft cloth;
for the toughest dirt, use ethylic alcohol, acetone or
EN
another non-halogenated solvent; do not use abrasive
powder detergents or corrosive substances such as
hydrochloric acid, muriatic or sulphuric acid.
The use of acids can affect the unit's operation and
safety
Do not use brushes, steel cottons or abrasive disks made
with other metals or alloys that might cause rust stains due
to contamination. For the same reason, avoid contact with
iron objects.
Do not use steel cottons or stainless steel brushes because
thile they will not contaminate surfaces, they can cause
damaging scratches. If dirt is tough, do not use sandpaper
or rough paper, but use synthetic sponges (for example
Scotchbrite sponges). Do not use substances for cleaning
silver and be careful with hydrochloric or sulphuric vapors
coming from washing products, for example.
Don't clean the unit with direct water jets or steam
cleaners.
WARRANTY CERTIFICATE
COMPANY NAME:
ADDRESS:
____________________________________________________________________________________________________
POSTAL CODE :
PROVINCE:
_______________
ATTENTION!
The manufacturer declines all responsibility for any inaccuracies in this handbook due to typing or printing errors.
The manufacturer reserves the right to make any changes that may be required without altering the basic features of the
product. The manufacturer declines all responsibility in the event that the instructions given in this handbook are not fully
observed. The manufacturer declines all responsibility for any direct or indirect damage caused by incorrect installation,
tampering, poor maintenance and negligent use.
____________________________________________________________________________________________
TOWN:
__________ ___________________________________________________________________________
INSTALLATION DATE:
MODEL.
_________________________________________
PART NUMBER:
Incompatible LIN version
Unknown cause for the error
After cleaning, rinse it properly with clean water and
carefully dry it with a cloth.
REPLACEMENT OF THE COMPONENTS
Use only original spare parts supplied by the
manufacturer.
All maintenance must be carried out by qualified
personnel. The appliance should be serviced at least
once a year, which is why we recommend signing our
maintenance agreement.
LONG PERIODS OF APPLIANCE INACTIVITY
If the appliance is not used for long periods of time, please
observe the following:
1) Switch of the disconnecting switch to disconnect unit
from the mains
2) Clean the equipment and the surrounding areas
properly
3) Pour a small quantity of cooking oil on the stainless
steel surfaces
4) Carry out all maintenance operations
5) Cover the appliance with a suitable material and leave
a few openings to allow air to circulate.
WHAT TO DO IN THE EVENT OF A FAILURE
In the event of a failure, immediately disconnect the unit
from the mains and call for the Technical Assistance.
____________________________________________________________
________________________________
Contact the technical service centre
Contact the technical service centre
(SPARE PARTS)