BERTO'S E6SP6B Manual De Instrucciones página 35

MAINTENANCE
CARE OF THE APPLIANCE
ATTENTION!
- Before cleaning, switch off the unit and let it cool down.
- In the event of electrically supplied units, use the
isolator switch to disconnect the mains.
Carefully clean daily the appliance to guarantee its proper
operation and long life.
Steel surfaces must be cleaned with a dish washer
detergent diluted in very hot water by using a soft cloth; for
the toughest dirt, use ethylic alcohol, acetone or another
non-halogenated solvent; do not use abrasive powder
detergents or corrosive substances such as hydrochloric
acid, muriatic or sulphuric acid. The use of acids can affect
the unit's operation and safety.
Do not use brushes, steel cottons or abrasive disks
made with other metals or alloys that might cause
rust stains due to contamination. For the same reason,
avoid contact with iron objects.
Do not use steel cottons or stainless steel brushes
because whilst they will not contaminate surfaces,
they can cause damaging scratches. Metal powder,
metal shavings from working and iron material in general,
when in contact with stainless steel surfaces, can cause
rust stains. Superficial rust stain might be present on new
appliances and they can be removed with a detergent
diluted in water and a Scotch Brite sponge.
If dirt is tough, do not use sandpaper or rough paper, but
use synthetic sponges (for example Scotchbrite sponges).
Do not use substances for cleaning silver and be careful
with hydrochloric or sulphuric vapours coming from floor
washing products, for example. Do not aim water jets
directly on the appliance, it might be damaged. After
cleaning, rinse properly with clean water and dry
carefully with a cloth.
WARRANTY CERTIFICATE
COMPANY NAME:
____________________________________________________________________________________________
ADDRESS:
____________________________________________________________________________________________________
POSTAL CODE :
__________
PROVINCE:
_______________
ATTENTION!
The manufacturer declines all responsibility for any inaccuracies in this handbook due to typing or printing errors.
The manufacturer reserves the right to make any changes that may be required without altering the basic features of the
product. The manufacturer declines all responsibility in the event that the instructions given in this handbook are not fully
observed. The manufacturer declines all responsibility for any direct or indirect damage caused by incorrect installation,
tampering, poor maintenance and negligent use.
TOWN:
___________________________________________________________________________
INSTALLATION DATE:
____________________________________________________________
MODEL.
____________________________________________
PART NUMBER:
____________________________________
REPLACEMENT OF THE COMPONENTS
(SPARE PARTS)
Use only original spare parts supplied by the
manufacturer.
All maintenance must be carried out by qualified
personnel. The appliance should be serviced at least
once a year, which is why we recommend subscribing our
maintenance agreement.
LONG PERIODS OF APPLIANCE INACTIVITY
If the appliance is not used for long periods of time, please
observe the following:
1) Switch off the disconnecting switch to disconnect the
mains
2) Clean the equipment and the surrounding areas
properly
3) Pour a small quantity of cooking oil on the stainless
steel surfaces
4) Carry out all maintenance operations
5) Cover all appliances with a suitable material and leave a
few openings to allow air to circulate.
WHAT TO DO IN THE EVENT OF A FAILURE
In the event of a failure, disconnect the appliance
immediately from the main power supply by means of the
device positioned before the appliance and contact the
Technical Assistance Service.
| 35
EN