The use of non-original components and/or accessories will annul the warranty (see warranty terms on page 32) and may affect the
safety requirements.
Only use mild soap and water to clean the shell and allow the helmet to dry at room temperature. Never expose it to heat.
Cleaning of the helmet with benzene solvents or chemicals, or the application of adhesives or paint, may affect the shell's structure, thereby
affecting the safety features, without this damage being visible to the user. Do not apply adhesives, petrol or other chemical solvents to
this helmet.
Use a damp cloth with mild soap only to clean the inner lining. Allow the washed parts to dry at room temperature away from sunlight and never
expose them to heat.
Clean the retention system on a systematic basis with warm water and mild soap. Do not use solvents or other chemicals and do not
lubricate it.
Clean the polycarbonate visor initially by rinsing with lukewarm water, then washing with a normal mild liquid detergent, then drying with a soft
and smooth cloth. Handle the visor with care when cleaning to avoid damaging the scratch-proof surface. Do not under any circumstances use
solvents, alcohol, benzene, thinner or scouring powder; these materials are corrosive and may reduce the structural strength of the polycarbonate
or scratch the surface of the visor, with a consequent reduction of its mechanical and optical properties.
All painted surfaces are subject to natural deterioration due to weathering; in particular colours made with Fluo or UV paint. They may be
subject to a faster natural phenomenon of migration which will decrease their intensity. The phenomenon is enhanced when the helmet is
exposed to strong light for long periods.
Suomy declines all responsibility in the event of changes to the painted surfaces due to wear and tear phenomena (effects of sunlight,
fumes, cleaning detergents, blows, and scratches).
This does not, however, affect SUOMY MX TOURER'S performance and quality.
GENERAL RULES
Eng
21