Install The Battery Pack; Remove The Battery Pack; Install The Bit; Remove The Bit - Powerworks ISG303 Manual Del Operador

5.2

INSTALL THE BATTERY PACK

WARNING
• If the battery pack or charger is damaged, replace
the battery pack or the charger.
• Stop the machine and wait until the motor stops
before you install or remove the battery pack.
• Read, know, and do the instructions in the battery
and charger manual.
1. Align the lift ribs on the battery pack with the
grooves in the battery compartment.
2. Push the battery pack into the battery compartment
until the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
5.3

REMOVE THE BATTERY PACK

1
1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
English
5.4
1. Push reversing button in the center position to lock
the switch trigger.
2. Move the coupler forward and hold in position.
3. Put bit straight into coupler.
4. Release the couple.
Use only impact quality bits with a locking groove.
Make sure that you attach the bit tight in the coupler
before you use the machine.
5.5
2
1. Push reversing button in the center position to lock
the switch trigger.
2. Move the coupler forward and hold in position.
3. Pull the bit straight out of the coupler.
6
Always wear eye protection.
7

INSTALL THE BIT

NOTE
WARNING

REMOVE THE BIT

OPERATION

WARNING
EN