Start The Machine; Stop The Machine; Adjust The Turning Direction; Operate The Machine - Powerworks ISG303 Manual Del Operador

EN
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
6.1

START THE MACHINE

The machine can not work until the reversing button is
pushed fully to the left or right. Do not operate the
machine at low speeds for extended periods of time.
1. Push the switch trigger to turn the machine ON (I).
6.2

STOP THE MACHINE

1. Release the switch trigger to turn the machine OFF
(O).
Release the switch trigger and let the coupler to come
to a complete stop.
WARNING
NOTE
WARNING
English
6.3 ADJUST THE TURNING
DIRECTION
The machine has the reversing button (forward/reverse
lock) above the switch trigger to chang the direction of
the bit.
1. When the reversing button is on the left side of the
switch trigger, the bit direciton is forward.
2. When the reversing button is on the right side of the
switch trigger, the bit direction is reversible.
3. Put the direction button in the OFF (center lock)
position to help decrease the possibility of
accidental start when not operate.
Let the coupler to come to a complete stop before
changing the direction of rotation.
6.4

OPERATE THE MACHINE

1. Put the lock-off button in the correct position for the
operation.
2. Hold the machine with one hand.
3. Put the bit on the screw head and slowly push the
switch trigger. Start the bit slowly for more control.
4. When you drive the screw, work will begin.
8
WARNING