Idiomas disponibles
Idiomas disponibles
Congratulations on purchasing your
lisa RF time flash. You have selected
a modern and reliable system.
The lisa RF time flash is an electro-
nic clock with an analogue time dis-
play and a receiver for the radio sig-
nals from various lisa radio transmit-
ters. When a radio signal is detec-
ted, you are alerted in the form of a
flashing light / acoustic alarm and 6
light-emitting diodes. It is also pos-
sible to connect a vibrating cushion
(special accessory, order no.
A-3303-0).
Standard components
- lisa RF time flash
- 230 V power supply unit
- Warranty card
Startup
Connect the supplied mains lead to
the socket on the alarm clock and
plug it into a 230 V (+/- 10 %) power
outlet.
Time setting
Lightly pull the time and alarm set-
ting knob and turn it in the direction
of the arrow.
Warning: Pull the knob out carefully
and only turn it in the direction of
the arrow!
Alarm setting
Turn the time and alarm setting knob
in the direction of the arrow.
Switching on the alarm
Push the Alarm On/Off button. When
you see the green marking the alarm
is on.
Switching on the sound
Push the Sound On/Off button. When
you see the green marking the sound
is on.
Snooze Alarm
Touching the Light/Snooze
Alarm/lisa signal cancel switch will
stop the alarm and it will start again
in approximately
5 minutes.
Face illumination (back light)
Touching the Light/Snooze Alarm/
lisa signal cancel switch will light
the face.
Setting the correct radio channel
A special digital transmission pro-
cess ensures that the radio signals
are received error-free. This process
also makes it possible to set 10 dif-
ferent radio channels. When sup-
plied from the factory, the lisa RF
time flash is set to channel 0. It is
only necessary to set units to other
channels if you have several diffe-
rent users operating units in the
same building. Set the channel you
want by adjusting the channel selec-
tor switch on the underside of the
unit to the required channel number.
English 9
