Ultrasound Function; Tool Kit - ACTEON Piezotome Solo Manual De Uso

b) Deactivating irrigation
To deactivate irrigation, press the
graph (Fig. 3, item 7) is then blank.

7.5 ULTRASOUND FUNCTION

Important:
The irrigation parameters can be customised by the user for each programme.
The ULTRASOUND function can be adjusted when the handpiece is not connected to the device.
Programme d1 is the most powerful setting.
Select the programme to be used by pressing buttons
the symbol on the pedal (Fig. 4, item 2)
The selected programme appears on the LCD screen as d1, d2, d3 or d4 in addition to an associated bar graph
(Fig. 3, item 8)
Adjust the irrigation flow rate for each programme according to the recommendations of the tip-related
instructions (see chap. 7.4)
Press the button to validate the new settings (Fig. 3, item 4).
The storage of parameters is confirmed by an audible and visual signal (logo
Repeat this sequence to set all programmes, as required.

7.6 TOOL KIT

Important:
The device has a TOOL KIT function used to make various adjustments, such as brightness or return to
factory default settings.
To activate the TOOL KIT function, switch off the device, wait for 4 seconds, switch the device back on and
press and (Fig. 3, items 1 and 2) as soon as they appear on the home screen (Fig. 6).
A quick press on button
1) or the default factory settings menu
item 4).
a) Adjusting screen brightness
The user can adjust the brightness of the device screen.
Select the brightness settings menu
Adjust the brightness using the buttons
between 0% and 100%.
The brightness intensity level is indicated (Fig. 5, item 5).
b) Return to default factory settings
Returning to the default factory settings solely allows irrigation flow rates to be restored.
Select the default factory settings menu
The various factory configurations will be effective once you exit the tool kit.
Piezotome Solo V6 V2
button (Fig. 3, item 2) until 0ml/min is displayed. The irrigation bar
(Fig. 3, item 4) allows you to select the brightness settings menu
(Fig.5, item 2). The selected menu is identified by a cross (Fig. 5,
(Fig.5, item 1).
and
(Fig.5, item 2).
, , , or
(Fig. 3, items 1 and 2). The brightness can be adjusted
(Fig. 3, item 5) or by pressing
changes colour).
(Fig.5, item
9