Installation / Commissioning; Unpacking The Device; Recommendations - ACTEON Piezotome Solo Manual De Uso

Operation:
Intermittent service: 10 mins ON / 5 mins OFF
Output characteristics:
No-load voltage: 250 Volts (nominal value without handpiece)
Min. ultrasound frequency: 28 kHz
Irrigation flow rate: from 0 to 120 ml/min (nominal value)
Adjustment in steps of 10 ml/min (nominal value)
Flush flow rate: 120 ml/min (nominal value)
Protection:
Electrical class: Class 1
Electrical safety class: BF
Safety:
Protection against internal malfunctions
2 fuses (mains connector): 5mm x 20mm / 2 AT for 100 VAC to 230 VAC
1 internal fuse that cannot be accessed by the operator reference F1: 5mm x 20mm – 10 AT / 250 VAC
Overall dimensions:
Console:
Width: 378mm
Height: 136mm
Height with bracket: 460mm
Depth: 306mm
Weight: 3700g
Pedal:
Depth: 176mm
Width: 173mm
Height with arch: 140mm
Weight: 1000g max
LCD screen:
Height: 86mm
Width: 115mm
Handpiece cable: 2000mm
Temperatures:
Operating: +10°C to +30°C
Storage: -20°C to +70°C
Humidity:
Operating: 30% to 75%
Storage: 10% to 100% including condensation
Atmospheric pressure:
Between 500 hPa and 1060 hPa
IV - INSTALLATION / COMMISSIONING

4.1 UNPACKING THE DEVICE

Upon receipt of the device, look for any damage that may have occurred during transportation.
If necessary, contact your supplier.

4.2 RECOMMENDATIONS

Ask an approved dental installation technician to make any connection to the electrical network.
The device's electrical connection shall comply with standards in force in your country.
Warning: To avoid any risk of electric shock, this device must be connected to an electrical power supply
with a protective ground.
Piezotome Solo V6 V2 7