Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Note: The safety distance between the ceramic hob and the cupboard above
the hotplate should be at least 760mm.
Fix the hob on the table by screw four brackets on the bottom of hob (see picture)
after installation. Adjust the bracket position to suit for different table top thickness.
Cautions
The ceramic cooker hob must be installed by qualified personnel or
1.
technicians. We have professionals at your service. Please never
conduct the operation by yourself.
The ceramic cooker hob shall not be mounted to cooling equipment,
2.
dishwashers and rotary dryers.
The ceramic cooker hob shall be installed such that better heat radiation can
3.
be ensured to enhance its reliability.
The wall and induced heating zone above the table surface shall
4.
withstand heat.
To avoid any damage, the sandwich layer and adhesive must be
5.
resistant to heat.
A steam cleaner is not to be used.
6.
A board is must to be installed underneath the hob.
7.
Connection to power supply
The socket should be connected in compliance with the relevant standard,or
a single-pole circuit breaker.the method of connection is shown in Figure (3)
9
Tabla de contenido
