CORBERO CCV4061 Manual De Instrucciones página 11

Schematic diagram of the control panel
Lock
Instructions for Use
Preparation before using
When the power is switch on,the buzzer will sound once and all the indicators
will come on for one second and go out.The hob is now in standy mode.
Place the pan in the centre of the cooking zone.
Press the "
the timer indicators shows "--",the hob is now ready for heating.Then press
the " "or "
on it,the relevant hotplate start heating.Its corresponding cooking zone indicator
flashe "5" five seconds,when the other indicators show "-". Select the power
level by pressing the "
Note:
1. When the "
operation is carried out within one minute.
2. Every cooking zone is independent of each other.
Timer function
Cooking timer
First select the cooking zone by press the "-" or "+"of the relevant heating
zone,then the cooking zone display flashing.Then adjust timer by pressing "-"
or "+" of timer,the timer is confirmed after the timer indicator flashing 5 seconds,
a red dot display at corresponding cooking zone indicator ,it reminds you a
cooking timer have been setted on this cooking zone .When cooking timer
expires,the corresponding cooking zone will be switch off automatically.
Note:Cooking timer only works for one cooking zone at the same time.
Timer regulating key
Power regulating key
" key to turn on the hob,then the power indicators show "-" and
" key for the corresponding cooking zone where there is a pan
" or "
" key is pressed,the hob returns to standby mode if no other
" key for the relevant hotplate.
11
On/Off